International Test Conference:
Oct 28 – Nov 2, 2018, Booth 208 Phoenix Convention Center, Phoenix,
Arizona, USA
CHELMSFORD, Mass.--(BUSINESS WIRE)--Pickering Switching Solutions, including Pickering Interfaces, the
People are also reading…
leading supplier of modular signal switching and simulation solutions
for use in electronic test and verification, and Pickering Electronics,
the pioneering leader in reed relay miniaturization and performance,
will exhibit at the International Test Conference, the world’s premier
event dedicated to testing of electronic devices, boards and systems
from verification, test, diagnosis, failure analysis and process and
design improvement, in Phoenix, Arizona. On booth 208, the company will
showcase its latest high-density PXI and Ethernet LXI Switching &
Simulation Solutions along with Signal Routing Software, its 6U Modular
Chassis and the world’s smallest reed relays. Products highlighted
include:
Model 65-221 High-Density Modular LXI Ethernet Reed Relay Matrix
Originally designed to test Semiconductors at wafer and package levels,
this Reed Relay Matrix solution combines our latest LXI Chassis with our
new plug-in matrices. The range comprises four models covering matrices
of up to 1,536x4 in increments of 128, 768x8 in increments of 64, 384x16
in increments of 32, and 192x32 in increments of 32. Users can specify
as many or as few plug-ins (up to six) required and can field upgrade
the chassis to extend the matrix when necessary. Another important
feature is that over 1,500 relays can be closed simultaneously for
specific conditions for parametric testing. These plug-ins also offer
built-in scan list sequence stores with triggering capability, providing
users with the ability to set a series of up to 200,000 pre-determined
sequences on an LXI instrument, the sequences can be triggered by
software or one of the sixteen DIO software configurable open collector
triggers. They also feature multi-bus capability for parallel testing.
Model 40-559 BRIC™ Ultra-High-Density Large PXI Matrix Modules
This range of large PXI matrices are robust 1A/20W switching modules,
with up to 4,096 crosspoints. Constructed with the Pickering
Electronics’ Series 120 4mm x 4mm reed relays, this new generation of
1Amp PXI matrices delivers twice the density of any competing large
matrix module. Available in 2, 4, or 8-slot PXI sizes, these PXI
matrices enable a complete functional ATE system to be housed in a
single 3U PXI chassis and allow the use of much lower cost 8 or 14 slot
PXI chassis.
The range comes with Pickering’s Built-in Relay Self-Test (BIRST) and is
also supported by their eBIRST Switching System Test Tools. These tools
provide a quick and simple way of finding relay failures within the
modules.
Model 40-297 PXI Precision Programmable Resistor Module Designed
as a simple solution for applications requiring accurate simulation of
resistive sensors, this series includes 50 model configurations per
platform, and is also available in PCI form/factor. Each version offers
users the choice of channel count, range and setting resolution. Units
feature resolution from 0.125Ω to 2Ω, channel counts from 3 to 18 and
basic accuracy is 0.2% ± resolution.
All of Pickering’s PXI switching and simulation modules can be used in
any PXI chassis and can be fitted to PXI hybrid slots in a PXIe chassis.
They also can also be used in Pickering LXI Modular chassis for users
preferring control via an Ethernet port, including Pickering’s USB/LXI
Chassis:
6-slot USB/LXI Modular Chassis (60-106)
Pickering’s new six-slot modular LXI/USB chassis occupies only a small,
lightweight 1U form factor, making it suitable for portable, bench-top,
and space-restricted applications. The 60-106 chassis accepts from one
to six Pickering PXI 3U modules; the user can choose from over 1000
modules including programmable resistors, matrices, multiplexers,
general purpose relays, RF switches and fault insertion units. The
systems are USB 3.0-compatible, and feature a fully compliant LXI
interface with the option of a Wi-Fi dongle (sold
separately). Therefore, remote control via USB or LXI Ethernet is
possible
Switch Path Manager™ Signal Routing Software
This signal routing software simplifies signal routing through switching
systems and speeds up the development of switching system software.
Switch Path Manager supports Pickering's PXI, LXI, PCI and GPIB
switching modules and the interconnection between these products.
Pickering will also highlight its eBIRST Switching System Test Tools.
Designed specifically for Pickering’s PXI, PCI or LXI products, these
tools simplify switching system fault-finding by quickly testing the
system and graphically identifying the faulty relay.
Comments Bob Stasonis, Director of Sales & Marketing at Pickering
Interfaces: “We keep adding to our already-huge range of switching and
sensor simulation products - over 1000+ in PXI alone. This means that
test engineers do not need to compromise; we have a product that will
precisely meet their requirements. And if we don’t, we will custom
design a solution.” Pickering Interfaces stands behind all of its
manufactured products with a standard three-year warranty and guaranteed
long-term product support.
For more information, visit www.pickeringtest.com.
Smallest Reed Relay Notably, Pickering Interfaces is the only
switching test equipment manufacturer that also manufactures the key
element in such products - reed relays via group company, Pickering
Electronics. At ITC, the company will also showcase the world’s smallest
through-hole reed relay, the Series 124 ultra-high density 4mm2
TM device, which has a 4 x 4mm footprint, and measures just
9.5mm high. Series 124 reed relays feature a sputtered ruthenium switch
rated at 5 watts, 0.5 amps. These are the same reed switches as used in
the long-established Pickering Series 111, 111P and 117 but are
orientated vertically within the package, facilitating such high
density. The relays boast very fast operate times, typically 80µs,
making them ideal for high speed test systems, and due to the incredibly
small size they are also suitable for very high-density applications
such as A.T.E. and Semiconductor switching matrices or multiplexers.
Graham Dale, Technical Director at Pickering Electronics comments: “Over
the years, Pickering Electronics has pioneered several reed relay
developments which has resulted in our leadership position, including
the use of mu metal screens that enable relays to be stacked closely
together with interference problems, and the formerless coils which save
space. The new Series 124 reed relays once again set the bar for
miniaturization.”
For more information, visit www.pickeringrelay.com.
About Pickering Switching Solutions
Pickering Electronics was formed in January 1968, to design and
manufacture high quality reed relays, intended principally for use in
Instrumentation and Test equipment. Today, Pickering's Single-in-Line
(SIL/SIP) range is by far the most developed in the relay industry with
devices 25% the size of many competitors. These small SIL/SIP reed
relays are sold in high volumes to large ATE and Semiconductor companies
throughout the world.
Pickering Interfaces designs and manufactures modular signal switching
and simulation for use in electronic test and verification. We offer the
largest range of switching and simulation products in the industry for
PXI, LXI, and PCI applications. To support these products, we also
provide cable and connector solutions, diagnostic test tools, along with
our application software and software drivers created by our in-house
software team.
Pickering’s products are specified in test systems installed throughout
the world and have a reputation for providing excellent reliability and
value. Pickering Interfaces operates globally with direct operations in
the US, UK, Germany, Sweden, France, Czech Republic and China, together
with additional representation in countries throughout the Americas,
Europe and Asia. We currently serve all electronics industries
including, automotive, aerospace & defense, energy, industrial,
communications, medical and semiconductor.
Contacts
Pickering Electronics
Poppy Moore
+44
1255 428141
or
Pickering
Interfaces
Kimberly Otte
+1
978-455-0376